Check out our high-performance Suspension Parts for your Toyota.
All our suspension systems and parts can be installed by a professional off-road shop near you, in-house at Solo Motorsports or by yourself. We highly recommend getting our products installed by an professional, in case you do not have the required skills, tools and experience. It will save you time and money.
Toyota Alignment Cam & Cam Tabs Upgrade
The Toyota Alignment Cam Upgrade kit is the BEST way to make sure your truck stays aligned, forever! Unlike many other kits ours offers more points of alignment, properly shanked bolts, and nuts capable of withstanding severe vibration and shock loads. Read the full description to find out what makes our kit the best!
Toyota Upper Control Arms – Mid Travel
Solo Motorsports is proud to offer our 1″ uniball tubular upper control arms.
Please specify if your truck has the 1st Gen Tundra brake calipers upgrade.
Toyota Double-Shear Kit / Upper Control Arm Bolt Reinforcement
Toyota Double-Shear Kit / Upper Control Arm Bolt Enforcement for the Tacoma, 4Runner, Sequoia, Tundra and FJ Cruiser. Strengthens the factory coil buckets.
Toyota Fabricated Spindles / 2WD and 4WD
Solo Motorsports is proud to offer our fully-fabricated spindles for both the 2WD and 4WD 1996-2004 Toyota Tacoma, the 2000-2006 Toyota Tundra, and 1996-2002 Toyota 4Runner.
Toyota Steel-Braided Brake Lines
Our Toyota Steel-Braided Brake Lines are made from high-quality steel braided high pressure line, which is much more durable than … Read More
4Runner Outboard Shock Relocation Kit / 1996-2002
The 1996-2002 4Runner Outboard Shock Mount is the best way to increase wheel travel and performance out of your rear suspension.
1996–2004 Toyota Tacoma Outboard Rear Shock Mount Kit
Maximize rear suspension travel on your 1996–2004 1st Gen Toyota Tacoma with the Solo Motorsports Outboard Rear Shock Mount Kit. Relocating the shocks outside the frame allows 10–12″ travel shocks in 2.0″ or 2.5″ diameters with a more vertical shock position for improved suspension control. Fully boxed upper and lower mounts provide increased strength while maintaining room for hydraulic bump stops. Pair with Deaver J59 leaf springs and Solo Motorsports extended shackles for approximately 12″ of rear wheel travel.
Toyota Rear Bump-Stop Mounts / 96-04 Tacoma & 96-02 4Runner
Long Travel Shock Mount / 05-23 Tacoma and 03-23 4Runner
Check out our Long Travel Shock Mount for the 2005-23 Toyota Tacoma and 2003-23 Toyota 4Runner. Fit a 10″ Coilover and 10″ Bypass shock.
1996–2002 Toyota 4Runner Stock Length Lower Control Arms
Upgrade your 1996–2002 Toyota 4Runner with fully fabricated stock-length lower control arms designed for increased strength, ground clearance, and improved tire clearance. The lower ball joint is moved forward 1 inch for additional tire clearance and approximately 2–3 degrees of positive caster.
1996–2004 Toyota Tacoma Stock Length Lower Control Arms
Upgrade your 1996–2004 Toyota Tacoma with fully fabricated stock-length lower control arms designed for increased strength, ground clearance, and improved tire clearance. The lower ball joint is moved forward 1 inch for additional tire clearance and approximately 2–3 degrees of positive caster.
2000–2006 Toyota Tundra Stock Length Lower Control Arms
Upgrade your 2000–2006 Toyota Tundra with fully fabricated stock-length lower control arms. Built from 3/16-inch steel for increased strength and improved tire clearance, with the lower ball joint moved 1 inch forward for approximately 2–3 degrees of additional caster. Made in the USA.
2000–2007 Toyota Sequoia Stock Length Lower Control Arms
Upgrade your 2000–2006 Toyota Tundra with fully fabricated stock-length lower control arms. Built from 3/16-inch steel for increased strength and improved tire clearance, with the lower ball joint moved 1 inch forward for approximately 2–3 degrees of additional caster. Made in the USA.
Stock Length LCA / Tacoma 05-23 & 4Runner 03-24
Stock Length LCA for the Tacoma (05-22) and 4Runner (03-22). Fully fabricated LCAs for strength and ground clearance. Lower ball joint pushed forward 1″.
Toyota Bushing Rebuild Kits
If you own any of our Toyota Suspension Kits (Stock Length LCAs, Mid-Travel UCAs, Long travel LCAs) we now offer Toyota Bushing Rebuild Kits.
These Bushings will not work with Factory Toyota Suspension Arms