Home » Shop » Suspension Kits » Toyota Suspension Kits » Tacoma / 4Runner / FJ Cruiser » 1996–2004 Toyota Tacoma Stock Length Lower Control Arms

1996–2004 Toyota Tacoma Stock Length Lower Control Arms

$1,410.00

Upgrade your 1996–2004 Toyota Tacoma with fully fabricated stock-length lower control arms designed for increased strength, ground clearance, and improved tire clearance. The lower ball joint is moved forward 1 inch for additional tire clearance and approximately 2–3 degrees of positive caster.

Description

Why Upgrade Your 1st Gen Tacoma Lower Control Arms?

The factory lower control arms work well for a stock truck, but larger tires and harder off-road use can expose their limitations. We designed our 1st Gen Tacoma Lower Control Arms for owners who want more strength, ground clearance, and tire clearance without increasing the factory track width.

Designed for the 1996–2004 Toyota Tacoma, these stock-length lower control arms move the lower ball joint forward 1 inch. This provides additional tire clearance while adding approximately 2–3 degrees of positive caster, helping improve alignment geometry on modified trucks.

Each control arm is built from 3/16-inch steel using CNC laser-cut and CNC-bent components. Interlocking internal ribs reinforce the fully boxed design before each assembly is MIG welded for strength and durability.

We also designed these LCAs around how Tacoma owners build and use their trucks. Factory bump-stop mounting threads are retained, while an integrated strike pad allows for the addition of hydraulic bump stops. Factory-location sway-bar tabs allow you to retain the original sway bar configuration.

These control arms are a great foundation for trucks running 33-inch tires. With additional clearance modifications, 35-inch tires can also be used.

Whether you’re building a daily driver, mid-travel setup, or capable off-road Tacoma, these LCAs provide increased strength and clearance while maintaining a stock-width suspension setup.

Key Features

  • Fits 1996–2004 Toyota Tacoma
  • 2WD and 4WD applications
  • Stock-length design maintains factory track width
  • Moves lower ball joint forward 1 inch
  • Adds approximately 2–3 degrees of positive caster
  • Improves clearance for larger tires
  • Designed around 33-inch tires
  • 35-inch tires possible with small clearance modifications
  • Retains factory bump-stop mounting threads
  • Integrated hydraulic bump-stop strike pad
  • Factory-location sway-bar tabs
  • Urethane bushings and center sleeves included
  • Satin black powder-coated finish
  • Made in the USA

Additional information

Weight 43 lbs
Dimensions 19 × 19 × 13 in
Select Vehicle

Tacoma, 4Runner/Prado 90

No additional boxes are available for this product.

Torque Specs

  • Upper Control Arm Cross Bolt (long bolt through the coil bucket): 85 ft-lbs use Blue Loctite on Threads and Anti-Seize the Shank of the bolt.
  • Lower Control Arm to Frame Pivot Bolts: 90-95 ft-lbs

Alignment Specs

  • 0° of Camber or (-0.2° to -0.5°)
  • -1/8" Toe in (-0.1 to -0.2)
  • +3-4° of Caster

This product fits the following vehicles:

Make Model Year
Make Model Year
Toyota Tacoma 1996-2004 (1st Gen)