Dana 44 TTB Stub Shaft C-Clip Eliminator
Keep the stub shaft positively retained when running a locker or limited-slip differential in your Dana 44 TTB. Our C-Clip Eliminator uses a 1/8″ chromoly bracket, machined Delrin bushing, and CNC-machined billet aluminum collet to prevent the stub shaft from pulling out as the suspension cycles. Bolt-on or weld-on installation. Made in the USA.
1987–1996 Ford Bronco Tire Swing Rebuild Kit
Restore the factory swing-out spare tire carrier on your 1987–1996 Ford Bronco with our Tire Swing Rebuild Kit. Features custom-machined self-lubricating bronze pivot bushings and Grade 10.9 shanked pivot hardware to help eliminate worn-pivot play. Choose the Full Rebuild Kit to also replace the striker, bump stop, and tire release linkage with our heavy-duty connecting rod and heim joints. Made in the USA.
1987–1996 Ford Bronco Tire Swing Striker Bracket
Replace a worn, damaged, or missing factory tire swing striker on your 1987–1996 Ford Bronco. Fabricated from 3/16″ steel with a satin black powder-coated finish and supplied with a stainless steel striker bushing, new striker bolt, rubber bump stop, and Grade 8.8 mounting hardware. Made in the USA.
1987–1996 Ford Bronco Dropped Spare Tire Mount
Make mounting a larger spare tire easier with our 1987–1996 Ford Bronco Dropped Spare Tire Mount. Relocates the spare 2.5″ lower and 1/2″ farther outward for easier loading and additional clearance from the factory tire carrier tubing. Fabricated from 3/16″ laser-cut steel with a satin black powder-coated finish, Grade 8 hardware, and an integrated backup camera or LED pod mounting surface. Bolt-on installation with no drilling required. Made in the USA.
1987–1996 Ford Bronco Spare Tire Carrier Swing Stop
Keep your factory Bronco spare tire carrier from swinging where you don’t want it. Our 1987–1996 Ford Bronco Spare Tire Carrier Swing Stop uses a spring-loaded stainless steel pull pin to lock the carrier into three functional positions. CNC-machined and laser-cut components install using the factory mounting holes with Grade 8 hardware and no drilling required. Made in the USA.
1992–1997 Ford Bronco & F-150 Radiator Core Support Mounts
Replace rusted, damaged, or broken factory frame brackets with our 1992–1997 Ford Bronco & F-150 Radiator Core Support Mounts. Fabricated from 3/16″ steel plate, CNC laser cut and CNC bent for consistent fitment. Designed for factory crumple-zone frames and installed by removing the original mounts and welding the replacements into position. Driver and passenger mounts included. Made in the USA.
1980–1996 Ford Bronco 6061 Solid Body Mount Kit
Designed for 1980–1996 Ford Broncos running an interior roll cage, our Solid Body Mount Kit replaces the factory vulcanized rubber mounts with CNC-machined 6061 aluminum mounts to eliminate body-to-frame movement. Helps provide a stable foundation for roll-cage installations and reduce stress around cage plate work. Includes 10 aluminum mounts, 1/4″ zinc-plated lower washers, and 1/2″ Grade 8 hardware. Made in the USA.
1992–1997 Ford Bronco & F-Series 30″ LED Light Bar Brackets
Mount a 30″ single-row LED light bar inside the factory grille of your 1992–1996 Ford Bronco or 1992–1997 F-Series with Solo Motorsports LED Light Bar Brackets. Laser cut and CNC bent from 10-gauge steel with a large three-hole mounting base to help distribute the load across the factory fiberglass header panel. Works with straight or curved light bars up to 3.75″ deep while retaining access to the factory hood release. Grade 8 hardware included. LED light bar NOT Included
1980–1996 Ford Bronco Gas Tank Skid Plate
Heavy-duty Gas Tank Skid Plate for the 1980–1996 Ford Bronco, built around a 1.25″ × .120-wall DOM tubular cradle with 3/16″ steel frame mounts and a 3/16″ aluminum skid plate. The Race Tuck design follows the factory tank closely for serious protection with minimal ground-clearance loss. Made in the USA.
1992–1996 Ford Bronco Rear Defroster Button Overlay
Add the factory rear defroster button to an aftermarket replacement dash bezel in your 1992–1996 Ford Bronco. The Solo Motorsports Rear Defroster Button Overlay is professionally 3D printed from Black Nylon 12 and provides a clean finished mounting location for the original rear window defroster button.
1992–1997 Ford Bronco & F-150 Prerunner Front Bumper
Bolt-on Prerunner Front Bumper for the 1992–1996 Ford Bronco and 1992–1997 Ford F-150, featuring an adjustable mounting system that allows the bumper to be centered to the body. Built around a 2″ radius-bent main tube with a 3/16″ aluminum skid plate and 1/4″ ABS valance. Available in DOM or mild steel with an optional pusher bar. Made in the USA.
1987–1996 Ford Bronco Fire Extinguisher Mount
Securely mount a fire extinguisher in your 1987–1996 Ford Bronco without drilling holes through the floor. Our bolt-on Fire Extinguisher Mount utilizes existing factory seat and floor mounting points and is available in driver-side, passenger-side, or front configurations. Satin black powder-coated finish and Made in the USA.
1992–1996 Ford Bronco Cargo Shelf Brackets
Add elevated storage to your 1992–1996 Ford Bronco while keeping the main cargo floor available for larger gear. Our Cargo Shelf Brackets are CNC cut and bent from heavy-duty 10-gauge American steel and utilize existing fiberglass-top mounting locations. Available with or without crossbars and finished in satin black powder coat. Made in the USA.
1992–1996 Ford Bronco BW1356 VSS Relocation Kit
Keep your E4OD shifting properly after a rear axle swap with our 1992–1996 Ford Bronco BW1356 VSS Relocation Kit. Relocates the Vehicle Speed Sensor from the factory 8.8 rear axle to the rear of the BW1356 transfer case while reusing the factory Ford VSS sensor. Ideal for Broncos upgrading to a stronger rear axle while retaining the E4OD transmission.
1980–1996 Ford Bronco Bolt-On Rear Bumper
Low-profile bolt-on rear bumper for the 1980–1996 Ford Bronco, constructed from .120-wall DOM tubing with a 2″ main tube and 1/4″ frame mounting plates. Features an integrated reverse-dimple step and recovery receiver, with optional spare tire step and license plate bracket. Made in the USA.
1980–1996 Ford Bronco Aluminum Tailgate Cover
Replace a missing or damaged factory access panel and create a clean, flat surface across the tailgate of your 1980–1996 Ford Bronco. CNC laser cut from 1/8-inch 5052 aluminum and designed to remain removable for access to the rear window motor and internal tailgate components. Rivnuts and stainless steel hardware included. Made in the USA.