Rear Outboard Shock Mount / 1996-2002 4Runner
The rear shock location on the 3rd Gen 4Runner is in an incredibly tight and hard to reach place. The stock location also limits the size and type of shock that can be installed. This kit is designed to move the shocks to the outside of the frame and pushes suspension travel and performance to its limits!
Tacoma Rear Frame Box Kit / 1995-2004
Introducing 1995-2004 Rear Tacoma Frame Box Plates, designed to strengthen your Tacoma’s frame. These plates are designed to withstand the harshest off-road terrains and demanding conditions. Each kit is dimple died and includes plates for both the passenger and driver sides of the vehicle.
Fits Extended Cabs ONLY
Toyota Tundra Transmission Mount / 2000-2004
Upgrade your offroad experience with our Toyota Tundra Transmission Mount. Designed to fit 2000-2004 Toyota Tundra with A340E Transmissions.
Off-Road Suspension Limit Straps
Our Off-Road Suspension Limit straps feature quad wrapped 1.75″ wide nylon webbing. The tabs are zinc plated 4130 steel with deflector clips where the nylon meets the tabs to reduce abrasion and tearing
Toyota Steel-Braided Brake Lines
Our Toyota Steel-Braided Brake Lines are made from high-quality steel braided high pressure line, which is much more durable than … Read More
Toyota UCA Heim kit
Replace your worn out Heims used on for Toyota Long Travel kits and our XLT Race Kits Upper Control Arms. … Read More
Toyota UCA Uniball Kit
The Toyota UCA (Upper Control Arm) Uniball Kit replaces your worn out 1″ uniballs. This kit comes with new Fk … Read More
Toyota Rear Bump-Stop Mounts / 96-04 Tacoma & 96-02 4Runner
Toyota Bushing Rebuild Kits
If you own any of our Toyota Suspension Kits (Stock Length LCAs, Mid-Travel UCAs, Long travel LCAs) we now offer Toyota Bushing Rebuild Kits.
Toyota Rebuild-A-Rack Service
We will contact you for pricing and shipping costs
Starting price is 350$ (Price may change depending on the condition of the Rack and Pinion)
Toyota Double-Shear Kit / Upper Control Arm Bolt Reinforcement
Toyota Double-Shear Kit / Upper Control Arm Bolt Enforcement for the Tacoma, 4Runner, Sequoia, Tundra and FJ Cruiser. Strengthens the factory coil buckets.
Toyota Upper Control Arms – Mid Travel
Solo Motorsports is proud to offer our 1″ uniball tubular upper control arms.
Please specify if your truck has the 1st Gen Tundra brake calipers upgrade.
Stock Length LCA / Tacoma 05-22 & 4Runner 03-22
Stock Length LCA for the Tacoma (05-22) and 4Runner (03-22). Fully fabricated LCAs for strength and ground clearance. Lower ball joint pushed forward 1″.
Toyota Lower Ball Joint Conversion to 1″ Uniball with Steering
The Toyota Lower Ball Joint Conversion to 1″ Uniball with Steering replaces the factory Toyota lower ball joints and tie … Read More
Toyota 4WD Custom Axle Package
Our Toyota 4WD axle package includes high-angle 930 CV inner joints, 930 RCV adapter flanges at differential, 930 CV retainer rings, Dutchman 4340 chromoly axle shafts, hardware, and Warn part-time hubs.
Mid-Travel Suspension Kit / Tacoma 96-04 & 4Runner 96-02
Mid-Travel Kit for the Tacoma and 4Runner will greatly improve your truck’s off-road experience. Kit gains 1″-3″ of lift and fits a 33″ tire.
Long Travel Kit / Tacoma 96-04 & 4Runner 96-02
Solo Motorsports Long Travel Kit allows you to achieve 14″ of fully-functional 2WD wheel travel for your 1996-2004 Toyota Tacoma and 1996-2002 Toyota 4Runner.
Race Suspension Kit / Tacoma 05-21 / 4Runner 03-21 / FJ Cruiser
We are proud to offer our XLT Race Series Long Travel Suspension Kit for Toyota Tacomas, FJ Cruisers, and 4Runners.
Steering Wheel Cover Plate / Toyota
This is an add on for those of you with quick disconnect steering wheels. This plate covers up the ugly plastic panel and exposed wiring turning it in to a clean looking cover piece.
Toyota Tacoma Suspension Seat Brackets
These 2005-2015 Toyota Tacoma Suspension Seat to stock seat slider brackets allow you to bolt standard Suspension Seats with 18” on center vertical mounting tabs directly to your factory seat sliders.
Toyota RCV Axle Package
The Toyota RCV Axle Package for our 4WD Mid-Travel, Long Travel, and XLT Suspension kits that use our Dana 44 Full Fabricated Spindles.
Toyota Steering Rack Upgrade / Tacoma 4Runner FJ Cruiser
Upgrade from the stock Toyota Tacoma, 4Runner, FJ Cruiser GX470 steering rack to the beefy 2nd Gen Toyota Tundra Rack and Pinion.
Toyota Steering Wheel Quick Release Stub Adapter
Bolt-on Steering Wheel Quick Release Adapter for Toyota cars and trucks. This adapter works with the Sweet Mfg steering wheel hub and others.
Toyota Tundra Suspension Seat Brackets
These 2000-2006 Toyota Tundra suspension seat to stock seat slider brackets allow you to bolt standard suspension seats, with 18” on center vertical mounting tabs, directly to your factory seat sliders.