2021–2026 Ford Bronco UCA Double-Shear Kit.
Reinforce the factory upper control arm mounting point with our Ford Bronco UCA Double-Shear Kit. Designed to add support to the long factory UCA bolt while strengthening the factory coil buckets, helping prevent the bolt from bending during repeated off-road use. CNC cut from 10-gauge steel and designed to work with aftermarket upper control arms that retain the factory mounting location. Weld-It-Yourself. Made in the USA.
1980–1996 Ford Bronco & F-150 Extended Radius Arm Ki
Increase suspension travel and improve TTB geometry with our Ford Bronco & F-150 Extended Radius Arm Kit. Built from 1-3/4″ x .120-wall DOM tubing and 1/4″ 1020 CR steel plate with triangulated construction, massive 1-1/4″ heims, 17-4 stainless spacers, and 1/4″ pivot boxes. Designed for Solo Cut & Turned Dana 44 TTB beams and Mid-Travel or Long-Travel suspension systems. Pivot boxes use a factory frame hole for placement with no frame welding required.
1980–1996 Ford Bronco Front Hydraulic Bump Stop Mounts
Control hard bottom-outs with our 1980–1996 Ford Bronco Front Hydraulic Bump Stop Mounts. Designed for 2×2 King hydraulic bump stops, these mounts use existing factory frame holes for bolt-on installation and are designed to work with Solo Motorsports Radius Arms. Compatible with stock fenders and 35″ tires. Grade 8 hardware included. Made in the USA.
Will not work with the factory coil bucket.