Ford & Toyota Off-Road Suspension Kits, Lift Kits & Parts
Solo Motorsports is your full service one-stop shop for all off-road suspension, parts and fabrication needs!
With over 25 years of experience in off-road fabrication and design. We specialize in high-performance, race-proven mid & long-travel suspension kits, lift kits, leveling kits, suspension components, roll cages, and other parts for Ford and Toyota vehicles.
Browse Products by Category
If you can’t find the right part, supension kit or lift kit for your vehicle, please don’t hesitate to call us at the shop.
– OR –
Search Products by Vehicle
Search Tip: Select your vehicle, and then use Category and/or Keyword to narrow the results if needed. Example: Ford >> Bronco >> Suspension Kits
Products on Sale
Sign up on the bottom, and never miss a deal. Email notification are sent out when suspension lift kits or fabrication parts go on sale.
1992–1996 Ford Bronco Rear Defroster Button Overlay
Add the factory rear defroster button to an aftermarket replacement dash bezel in your 1992–1996 Ford Bronco. The Solo Motorsports Rear Defroster Button Overlay is professionally 3D printed from Black Nylon 12 and provides a clean finished mounting location for the original rear window defroster button.
1992–1997 Ford Instrument Cluster Bezel Repair Clips
Repair broken mounting points on your 1992–1997 Ford instrument cluster bezel without replacing the entire bezel. These 3D-printed repair inserts bond to the backside of the factory bezel and use the included push clips to securely mount it back in place. Made in the USA.
1992–1996 Ford Center Console Non-Slip Mat
Keep phones, keys, and other small items from sliding around your 1992–1996 Ford Bronco or F-Series center console. Made from durable non-slip silicone with an adhesive backing for quick installation while helping protect the factory console from scratches and wear.
1992–1997 Ford Rear Window & Dual Fuel Tank Switch Repair Bracket
Repair broken dash mounting tabs with the original Solo Motorsports Ford Dash Switch Repair Bracket. Designed to securely remount the factory Bronco rear window switch or F-Series dual fuel tank switch using the existing dash mounting locations. Stamped from 16-gauge steel, zinc coated for corrosion protection, and Made in the USA.
1992-1996 Ford Non-Slip Dash Mat
Keep phones, keys, sunglasses, and other small items from sliding around your 1992–1996 Ford Bronco or F-Series dash. Made from durable non-slip silicone with an adhesive backing for quick installation while helping protect the factory dash from scratches and everyday wear. Includes one long and one short dash mat.
1992–1997 Ford Push Button 4WD & Wait to Start Dash Repair Bracket
Push Button 4WD Repair Bracket for 1992-1996 Ford Bronco and Ford F-150. Fix the old OBS dash with our 4WD Repair Plate.
HD Billet Steering Adjusters / Ford HD Tie Rod Conversion
Upgrade your Ford HD Tie Rod Conversion / Ambulance Steering Upgrade with our CNC-machined 7075 Billet Steering Adjusters. Machined 1″ longer for increased thread engagement with the HD steering linkage and supplied with 416 stainless steel anti-galling jam nuts. Designed specifically for HD-converted 1980–1996 Ford Bronco and F-150 steering systems. Will not fit factory tie rods or drag links. Made in the USA.
1992–1997 Ford Dash Bezel Repair Inserts
Repair broken mounting points on your 1992–1997 Ford Bronco or F-Series dash bezel with high-quality injection-molded repair inserts. Designed to restore the factory screw mounting locations, securely hold the original bezel in place, and help eliminate unwanted dash rattles. Includes left- and right-side inserts with mounting screws.
Recently Added Products
2007–2014 Toyota FJ Cruiser XLT Race Suspension Kit
Take your 2007–2014 Toyota FJ Cruiser to the next level with the Solo Motorsports XLT Race Suspension Kit. This 4.5″-over system provides approximately 18–19″ of front wheel travel and features boxed control arms, fully fabricated spindles, 1″ uniballs, heim steering, and Dana 44 hubs and snouts. Designed around 10″ coilover and bypass shocks for serious off-road builds. Fiberglass fenders, sheet-metal modifications, and experienced professional installation required. Made in the USA.
2003–2024 Toyota 4Runner XLT Race Suspension Kit
Take your 2003–2024 Toyota 4Runner to the next level with the Solo Motorsports XLT Race Suspension Kit. This 4.5″-over system provides approximately 18–19″ of front wheel travel and features boxed control arms, fully fabricated spindles, 1″ uniballs, heim steering, and Dana 44 hubs and snouts. Designed around 10″ coilover and bypass shocks for serious off-road builds. Fiberglass fenders, sheet-metal modifications, and experienced professional installation required. Made in the USA.
2000–2007 Toyota Sequoia XLT Race Suspension Kit
Take your 2000–2007 Toyota Sequoia to the next level with the Solo Motorsports Race Suspension Kit featuring our XLT (Xtreme Long Travel) system. The 4.5″-over suspension provides approximately 17″ of front wheel travel and includes fully fabricated spindles, heim steering, and Dana 44 hubs and snouts. Designed around 10″ coilover and bypass shocks for serious off-road builds. Fiberglass fenders, sheet-metal modifications, custom shock towers, and professional installation required. Made in the USA.
1996–2002 Toyota 4Runner XLT Race Suspension Kit
Take your 1996–2002 Toyota 4Runner to the next level with the Solo Motorsports Race Suspension Kit featuring our XLT (Xtreme Long Travel) system. The 4.5″-over suspension provides approximately 17″ of front wheel travel and includes fully fabricated spindles, heim steering, and Dana 44 hubs and snouts. Designed around 10″ coilover and bypass shocks for serious off-road builds. Fiberglass fenders, sheet-metal modifications, custom shock towers, and professional installation required. Made in the USA.
2007–2014 Toyota FJ Cruiser Stock Length Lower Control Arms
Upgrade your 2007–2014 Toyota FJ Cruiser with fully fabricated Stock Length Lower Control Arms designed for increased strength and ground clearance without increasing track width. Built from 3/16″ steel, the LCAs move the lower joint 1″ forward for additional tire clearance and approximately 2–3° of caster. Includes FK 1″ uniballs, lower uniball conversions, urethane pivot bushings, 17-4 stainless steel misalignment spacers, and Grade 8 hardware. Made in the USA.
About Solo Motorsports
History
Solo Motorsports was founded in 1994. We are one of the longest-running off-road fabrication shops in Southern California.
We operate in a 10,000 sq ft facility located in Covina, CA.
Our 30+ years of passion for desert racing & off-road fabrication experience is reflected in the design, quality, and performance of each one of our suspension kits and products.
Products
We design and fabricate high-performance, race-proven, mid & long-travel suspension kits, lift kits and parts for street legal vehicles, prerunners, all the way up to competition-only desert race vehicles.
All of our parts and kits are designed with ease of installation in mind, especially our Ford and Toyota suspension kits.
We make your project become reality, no matter if you are looking for off-road parts, high-end suspension kits, lift kits, 4-link rear end setups, roll cages or a turn-key, full-tube-chassis race truck.
Services
Solo Motorsports is a full service, one-stop provider for all your fabrication and suspension needs:
- Design
- Fabrication
- Installation and Restoration
- Full Race Preparation
- Suspension Testing and Shock Tuning
- Turnkey Service
- Global Shipping
2019 NORRA 1000 Race – First In Class Winner