Description
(Some pictures show an incorrect pinion angle. Due to the lower and upper link lengths not adjusted at the time photos were taken.)
Solo Motorsports is proud to offer a W-I-Y Bronco Traditional Style 4-Link or Short-Course Style 4-Link Kit. Both 4-link kits incorporate the same front upper and lower pivot frame mounts that are CNC cut 1/4″ 4130 plate and pick up factory holes for alignment. Both kits use Tubular upper links made of 1.75″ x .120 wall tubing and 1 1/4″ heims at each end along with jam nuts.
The kits also includes CNC cut axle housing tabs for either a fabricated 3 1/2 housing or factory style stock housing.
Canoe Style
Our race-proven Canoe-Style lower links are set up for a 14″ coilover and 16″ bypass shocks pulling a realistic 24″ of useable wheel travel on a Bronco.
Canoe-style lower links come with 1″ uniballs at the front and 1 1/4″ heims at the rear and utilizes Canoe-style lower links that are fully welded with water drain holes.
Short-Course Style
The short-course style 4-link kit uses a strong 2 1/4″ x .250 wall tubular lower link with 1″ uniballs up front and 1 1/4″ heims at the rear end.
Short-course style 4-link uses an 18″ coilover shock off the rear end housing.
Specs
- Tubular upper links made of 1.75″ x .120 wall tubing and 1 1/4″ heims at each end
- Traditional Canoe-Style 4-Link Kit
- Designed for 14″ Coilover and 16″ Bypass Shocks
- Canoe-Style lower links with 1″ uniballs up front and 1 1/4″ heims at the rear
- Approx. 24in travel
- Short-Course Style 4-Link Kit
- Designed for 18″ Coilover Shocks (off the rear axle housing)
- 2 1/4″ x .250 wall tubular lower link with 1″ uniballs in front and 1 1/4″ heims at the rear
- Approx. 18in travel
Traditional Canoe-Style 4-Link Kit Includes
- Canoe-Style Lower Links with 1″ uniballs, machined spacers, and 1 1/4″ heims/jam nuts 1 pair.
- Tubular Upper Links with 1 1/4″ heims/jam nuts at both ends with machined spacers 1 pair.
- Front Lower Link frame pivots 1 pair.
- Front Upper Link frame pivots 1 pair.
- Axle housing tabs for either a fabricated housing or factory style.
Note
Coilover and bypass shocks require 1″ longer rod ends.
Short-Course Style 4-Link Kit Includes
- Tubular 1.75″ OD x .120 wall Lower links with 1″ uniballs, machined spacers, and 1 1/4 heim joints 1 pair.
- Tubular 2 1/4″ OD x .250 wall Upper Links with 1.25″ heims/jam nuts at both ends with machined spacers 1 pair.
- Front Lower Link frame pivots 1 pair.
- Front Upper Link frame pivots 1 pair.
- Axle housing tabs for a fabricated housing or factory style.
Options
- Ford Bronco Traditional Canoe-Style 4-Link Kit.
- Ford Bronco Short-Course Style 4-Link Kit.