Home » Shop » Suspension Kits » Ford Suspension Kits » Bronco and F150 1980-1996 » Bronco & F-150 Mid-Travel Suspension Kit / Stage 2

Bronco & F-150 Mid-Travel Suspension Kit / Stage 2

$4,599.00$5,999.00

The Stage 2 Cut N’ Turned Beam Kit is a high performance mid-travel kit. Adds 4″ of lift and fits for a 35″ tire.

Clear selection

Description

The Bronco and F-150 Mid-Travel Kit / Stage 2 is a high performance mid-travel suspension kit. A prefect upgrade for the front and the rear suspension for your Bronco or F-150.

The front suspension is similar to the Stage 1 Kit, providing 12 inches of usable wheel travel in 4×4, But includes rear suspension. The rear suspension comes with Deaver Q80s Leaf Spring Pack and our Q80 Shackle Conversion Kit.

This Stage 2 kit increases the rear suspension travel to 14 inches.  Which will convert any Ford Bronco or F-150 into a whoop-eating pre-runner and a perfect all around off-road vehicle.

A set of heavy-duty extended stainless brake lines for the front and the rear are included as well.

>> Check out the product review on BRONCO FACTORY / YouTube <<

Front

The Dana 44 TTB Beams are modified to allow for proper camber alignment with the 4″ coils.  The 1.25” Extended Radius Arms are equipped with heim joints and bring the vehicle’s camber to the correct value.

This kit includes a set of Bilstein 5100 or 2.0 Fox Remote Reservoir shocks, specifically valved and configured for a Bronco or F-150.  A secondary shock option is also available – see below.

Rear

The Deaver Q80 leaf springs are paired with our Q80 Shackle Conversion Kit to produce 14 inches of travel!

The rear Bilstein 5100 or Fox 2.0 Remote Reservoir shocks can remain in the stock location for Broncos.  Ford F-150 trucks require a special setup in the rear, please call us for options.

Specs

  • Front suspension travel approx.: 12 in
  • Rear suspension travel approx.: 14 in
  • Front and rear suspension lift approx.: 4 in
  • Recommended tire size: 35 in
  • Fiberglass required: No
  • Driveshaft modification required: No
  • Made in the U.S.A.

Bronco Mid-Travel Kit Includes

Front

  • Dana 44 Cut N’ Turned TTB Beam Work (core charges apply – read more)
  • 4″ Coils
  • FK 1.25″ heim joints
  • Extended Radius Arms
  • Pivot Boxes
  • 17-4 Stainless Steel Misalignment Spacers
  • Grade 8 Hardware
  • 3-Piece Braided Steel Extended Brake Line Kit (front and rear)
  • Alignment Cams (front)
  • Drop Pitman Arm
  • Set of Bilstein 5100 or 2.0 Fox Remote Reservoir shocks (behind the coils)

Rear

  • Deaver Q80 Leaf Springs, U-Bolts, and Bushings
  • Bilstein 5100 or 2.0 Fox Remote Reservoir shocks for stock rear shock mounts
  • Q80 Shackle Conversion Kit
  • Extended Stainless Steel Brake Line
  • 3/8″ U bolt Plates
  • Optional Weld on Spring Perches(must remove factory wedges)

Options

  • Bilstein 1: 2x front & 2x rear Bilstein 5100 shocks
  • Bilstein 2: 4x front & 2x rear Bilstein 5100 shocks
  • Fox 1: 2x front & 2x rear 2.0 Fox Remote Reservoir shocks
  • Fox 2: 4x front & 2x rear 2.0 Fox Remote Reservoir shocks

Installation

  • Installation by Solo Motorsports starts at $2200 – please contact us for more info.

Additional information

Weight 395 lbs
Dimensions 48 × 40 × 24 in
Select Vehicle

Bronco, F-150

Options

Bilstein 1, Bilstein 2, Fox 1, Fox 2

We have a full guide to help you install your Solo Stage 2 Kit.

Bronco Stage 2 Kit Install Guide (Front) PDF - Bronco Front Suspension Install Guide -

Bronco Stage 2 Kit Install Guide (Rear) PDF - Click Here -

Rear Axle Spring Perch Guide PDF - Click Here -

Rear Shackle Conversion photos - Click Here -

Bronco Install Photos PDF - Click Here -

 

 

This product fits the following vehicles:

Make Model Year
Make Model Year
Ford Bronco 1980-1986
Ford Bronco 1987-1991
Ford Bronco 1992-1996
Ford F-150 1980-1991
Ford F-150 1992-1996