Description
83-90 Ford Bronco II Long-Travel Suspension Kit Stage 4 is a high performance long-travel Front and Rear Suspension Kit for Rangers, Explorers, and Bronco IIs. This kit converts the TTB suspension to use a 12″ Coil-over performance shock. The Rear uses Deaver leaf springs paired with a King Shock 2.5 x 12″ smooth body or 3-tube bypass. This Kit is built for chase and prerunning down in Baja!
The 15 inches of front suspension travel soaks up the whoops, and delivers an amazing ride even through the roughest terrain. This Suspension kit is built for heavy off-road use, no matter if it’s on hard or soft packed dirt.
Front
The Cut N’ Turned Dana 44 TTBs with uniball pivots, uniballs, stainless steel misalignment spacers and a welded differential skid plate for superior durability are paired with 12″ 2.5 King Remote Reservoir Coil-over shocks. The W-I-Y shock hoops comes with pre-drilled alignment holes, allowing for easy and precise positioning before welding. This suspension system uses a 12″ coil over shock to keep your factory brake booster.
The Cut N’ Turned beams allow for proper camber. We weld the remaining TTB welds that the factory does not complete. Our 1 1/4″ Extended Radius Arms will bring back the correct caster and allows the wheel to travel on a greater arc.
We also offer additional beam plating. Which includes plating the front, back, top, and bottom of both beams. We weld a truss and skid plate to the driver’s beam for additional strength. We replace the stock bushings with 4130 chromoly uniball cups, FK uniballs, and stainless steel misalignment spacers for superior durability. Also a we can modify the Dana 35 TTB to run a Dana 44 spindle, snouts, and hub conversion.
Rear
The Deaver G50 or F31 progressive leaf springs will allow for 16 inches of wheel travel. The Rangers and Bronco IIs will require a custom bed cage. We recommend using a 2.5 x 16″ King shock to use with our leaf springs. If you would like to purchase shocks please give us a call.
–The Rangers and Bronco IIs do not come with rear Shackles or Shocks–
Deaver Spring Spec List:
- G50: Heavy Leaf pack for Ranger or Bronco II. Use if vehicle has big spare tire(s), tools, gear, fuel cell.
- F31: Daily Driver Leaf pack for Ranger or Bronco II. Use for light weight in the rear of the vehicle.
We strongly recommend professional installation for optimal performance and safety.
Specs
- Front suspension travel approx.: 15″
- Front suspension lift approx.: 4 in
- Recommended tire size: 33″ (35″ tire will require fiberglass)
- Fiberglass required: Yes
- 4130 Chromoly 1″ Uniball Cups welded on beam pivots
Ford Bronco II Long-Travel Kit Includes
Front
- Cut N’ Turned Dana 35 TTB
- 12″ stroke 2.5 King coil over shocks with remote reservoirs
- Coil-over Shock hoop
- 1 1/4″ Heimed Extended Radius Arms
- Radius Arm Pivot Boxes
- 17-4 Stainless Steel Misalignments
- Grade 8 Hardware
- Limit straps
- FK 1″ uniballs
- FK 1 1/4″ Heim Joints
- Grade 8 Hardware
- Front Extended Brake Lines
- Alignment Cams
Rear
- Deaver Leaf Springs (G50 or F31)
- Grade 8 Hardware
- Limit straps
- Rear axel shock tabs
- extended stainless brake lines
- Extended Shackles (Explorer only)
- King Shocks 2.5 x 12″ (Smooth Body or 3-tube Bypass for Explorer only)
Upgrade Options
- Modify Dana 35 TTBs to run a Dana 44 spindle, snouts and hubs.
- Full beam plating to the driver and passenger Dana 35 Twin Traction Beams